3 Part NCR Laser Paper: Buying Guide for Clean Multi-Part Forms

Last Updated: November 19, 2026

Quick Summary

3 part NCR laser paper is a pre-collated carbonless sheet set that produces copies without carbon sheets, using micro-encapsulated chemical coating. Each set stacks white, canary, and pink, and three-part sets provide three copies from one pass.

  • Straight collated sets run white, canary, pink; reverse collated sets run pink, canary, white.
  • Select heavy paper or cardstock, use the multipurpose tray, and disable duplex printing.
  • Acclimatize paper for 24 hours in the room where it will be used.
  • Our 3-part NCR stock runs 20 to 22 lb with 92 brightness.
  • A 500-sheet ream of 3-part paper yields roughly 167 sets.
Need carbonless forms that print clean?Copy-Cat stocks 3-part NCR laser paper in straight and reverse collation, shipped reliably.
Shop 3-Part NCR Paper

Table of Contents

How 3 Part NCR Laser Paper Works in Your Printer

3 part NCR laser paper is a pre-collated carbonless sheet set that produces copies without carbon sheets, using micro-encapsulated chemical coating. Each set stacks white, canary, and pink.

Browse our laser paper category to compare stock before committing.

Straight vs Reverse Collated NCR: Which Sequence Fits Your Form

Straight collated sets run white, canary, pink top to bottom. Reverse collated sets run pink, canary, white. The sequence determines which color lands on the customer copy and which stays in your file.

Sequence

Top Sheet

Middle

Bottom

Typical Use

Straight

White

Canary

Pink

White goes to customer, canary to office file, pink to accounting

Reverse

Pink

Canary

White

Pink goes to customer, white stays as the permanent record

Both sequences are available in the NCR products listed in our catalog, including 8.5" x 11" letter and 8.5" x 14" legal size.

We stock NCR Superior 3-part straight white/canary/pink in 500-sheet reams, and a reverse pink/canary/white version is also available. A common mistake is ordering the wrong sequence, check your existing form template before you buy.

NCR Superior 8.5" x 11" 3prt Straight White/Canary/Pink Carbonless Paper, 20 lbs 92 Brightness, 500/Ream (#5909)
NCR Superior 8.5" x 11" 3prt Straight White/Canary/Pink Carbonless Paper, 20 lbs 92 Brightness, 500/Ream (#5909)
NCR Superior 8.5" x 11" 3prt Reverse Pink/Canary/White Carbonless Paper, 20 lbs, 92 Brightness, 500/Ream (#5900)
NCR Superior 8.5" x 11" 3prt Reverse Pink/Canary/White Carbonless Paper, 20 lbs, 92 Brightness, 500/Ream (#5900)

Laser Printer Settings for Carbonless Forms

For carbonless forms, select heavy paper or cardstock, use manual feed or the multipurpose tray, disable duplex printing, and print at normal or high quality rather than draft. If you're still deciding which toner to use, our buying guide on business laser toner covers what to look for.

9 .5 Computer Paper

9 .5 Computer Paper

Also check paper size: if your printer defaults to letter but you loaded legal, you'll get a jam or a truncated form. If jams persist, our guide on how to prevent printer paper jams covers the feed and storage fixes that solve most of them.

Troubleshooting NCR Paper Jams and Faint Copies

Most NCR jams trace back to humid paper, a worn pickup roller, or an overfilled tray; faint third copies usually mean the fuser isn't applying enough pressure for the paper weight.

At Copy-Cat, we tell buyers the same thing: paper should be acclimatized for 24 hours in the room it will be used in.

If the bottom pink sheet is legible but weak, try the multipurpose tray first, and if that fails the printer may not be rated for multi-part stock.

Paper Weight, Brightness, and Opacity Explained

Our 3-part NCR stock runs 20 to 22 lb with 92 brightness.

Choosing the Right Size and Set Count

Letter size, 8.5" x 11", and legal size, 8.5" x 14", are both available in our catalog. Three-part sets provide three copies from one pass.

Frequently Asked Questions

Can you use standard NCR paper in a laser printer?

Yes, provided the paper is sold as laser compatible. Three-part NCR laser paper is built to take the fuser heat without the micro-encapsulated coating bleeding or the sheets curling. Check the ream label before loading, and print a single test set first.

What is the difference between straight and reverse collated NCR paper?

Straight collated sets run white, canary, pink, so the white original sits on top. Reverse collated sets run pink, canary, white, so the pink sheet is on top. Reverse collation suits forms where the bottom copy is the one your office files. Match the sequence to how your staff separates and distributes the finished sets.

How do I prevent paper jams when printing three-part forms?

Let the paper acclimatize in the room for 24 hours before use.

3 part ncr laser paper, Laser printer settings for carbonless forms, Straight vs reverse collated ncr, Troubleshooting ncr paper jams